I. Core Product Positioning
Designed for precision assembly in consumer electronics, this ultra-thin foam tape meets:
✔ Seamless bonding of touch panels and notebook covers
✔ 150μm ultra-thin profile for invisible fixation
✔ 380% ultra-high elasticity for uneven surfaces
II. Technical Parameters
| Parameter Category | Technical Indicator | Industry Significance |
|---|---|---|
| Base Material | PE Foam | Ultra-flexible and impact-resistant |
| Adhesive Type | Modified Acrylic | High bonding strength (12N/cm) |
| Total Thickness | 150μm (5.91mils) | One of the thinnest foam tapes in the industry |
| Elongation at Break | 380% | Adapts to surface irregularities up to 0.5mm |
| Short-Term Temp Resistance | 90℃ (30min) | Covers temporary overheating scenarios |
| Water/Dust Resistance | IP54 rating | Protects sensitive electronic components |
III. Four Core Advantages
1. Ultra-Thin & Elastic
- 150μm thickness delivers 12N/cm bonding strength
- Case study: Enables 30% thinner bezel bonding for ultrabooks
2. Superior Surface Conformity
- 380% elongation accommodates rough surfaces
- Compensates for 0.5mm assembly tolerances
3. Dual Protection
- Water and dust resistant (IP54)
- Absorbs 80% of impact energy
4. Precision Positioning
- Initial tack strength of 8N/cm
- Immediate next-step processing after application
IV. Application Guidelines
1. Notebook Cover Assembly
- Application: LCD panel-to-metal frame fixation
- Key Steps:
- Plasma-treat metal surface
- Apply at 30% stretch rate
- Press for 5 seconds to set
2. Smartphone Lens Module
- Risk Mitigation:
- Avoid optical zones of lenses
- Long-term use ≤80℃
V. Technical Q&A
❓ Q: Can it replace screws?
→ Suitable for auxiliary fixation; primary load-bearing points still require mechanical fasteners
❓ Q: Advantages over 3M 55236?
→ tesa 62622 is 40% thinner with 150% higher elongation
Post time: Apr-25-2025